Autopower roll bars and cages meet or exceed the safety requirements for most competition sanctioning organizations. Their bars and cages have been made to easily install into the vehicle and provide maximum protection. The fit in your vehicle allowing to enter the car quickly but more importantly, exiting quickly, while also conforming closely to your interior for a clean, look and feel.
All of their bars and cages are MIG welded and precision jig notched, giving the maximum strength and best fitment there is. Every roll bar and cage has been designed to fit specific car models so only minor, though there are some modifications that are necessary for the installation. Most applications are a true bolt-in and require NO WELDING.
STREET ROLL BAR
This roll bar will give your street car a performance look and style.
*In most cars rear seats and/or convertible top remain in place and useable.
*4 point roll bar is made of 1.750 x .120 DOM mild steel tube.
*All necessary installation and mounting hardware with back-up plates is included
STREET-SPORT ROLL BAR
Our Street-Sport bar is just what you need for your high performance street car.
*Designed for high performance street use.
*Bolt-in harness mount tube for easy installation of safety harnesses.
*Bolt-In Removable horizontal harness.
*4 point roll bar is made of 1.750 x .120 DOM mild steel tube.
*All necessary installation and mounting hardware with back-up plates is included.
The Street-Sport Roll Bar has a bold in harness mount tube for easy installation of harnesses and access to the back seat for street use.
RACE ROLL BAR
The Race roll bar is designed for solo, autocross and high speed time trials. All Race roll bars have a diagonal cross brace and most have a harness mount tube.
*Autopower will select tube size and type for your needs.
*Race roll bars are made with 1.750 x .120 DOM steel.
*Cars weighing more than 3500 lbs. use 2" x 120 ERW steel.
*4 point mounting with welded diagonal crossbrace.
*All necessary installation and mounting hardware with back-up plates is included.
*Optional bolt-in diagonal and harness tube can be ordered for this roll bar.
BOLT-IN ROLL CAGE
*SCCA & NASA legal for club racing.
*Top of the line in fit and construction.
*These cages are made to order, allowing for tube size and type to be selected.
*Diagonal cross brace and horizontal brace are a permanent weld-in design.
Designed to quickly and easily transform your street car into a race legal competition car. This cage closely conforms to your car’s interior, allowing quick entry & exiting. It uses precision fit, 6 mounting point, slip-tube and bolt-in design. This cage is approved by SCCA and NASA for open road racing and drifting events. The best fitting pre-fab cage you can buy. All cages made to order.
U-WELD FRONT CAGE KIT
This cage kit welded to an Autopower roll bar makes a race legal 6 mounting point roll cage. Autopower will choose tubing size when you place your order.
Most Kits Include:
*2 forward support brace tubes
*Top windshield cross tube
*4 door guards
*Under dash bar
*4 top corner gussets
*All necessary installation and mounting hardware with back-up plates included
All cages are made upon order. It will take approxiamately 2-3 weeks to arrive upon order. All cages are painted in an industrial black coating to prevent rust. Expect some paint damage during shipping.
|
If you are in the So. Cal. area, drop on by and say Hello!
