Inline Four offers you high-quality engine building from street to strip! Got a lot of miles on your engine and need a rebuild?? Then have us rebuild your bottom-end with our "Refresh" package. Want a true "ALL MOTOR" monster?? We can turn your Acura/Honda engine into a full street performer! We'll work with you to give you the optimum results you desire. See the details below for the various packages we offer.

Our "REFRESH" Bottom-End Package

Recommended if your short-block is due for a rebuild or if you'd like to extend the longevity of your short-block with some added performance. Details on what we do to the short-block for this package below:

• Block is Precision Honed To Exact Tolerances
• New Piston Rings
• New Main Bearings
• New Thrust Washers
• New Rod Bearings
• Glass Bead Pistons
• Micro-Polish Crankshaft
• New Gaskets and Seals
• Resurface Flywheel
• Complete Precision Balancing

POWER B-series Short-Block Package

Increases compression & structual integrity producing more horsepower & torque. Improves engine response and efficiency ideal setup for the street or strip. Details on what we do to the short-block for this package below:

• Block is Precision Honed To Exact Tolerances
• New Piston Rings
• New Main Bearings
• New Thrust Washers
• New Rod Bearings
• High-Compression Pistons
• Micro-Polish Crankshaft
• New Gaskets and Seals
• Mild Flywheel Lightening
• Complete Precision Balancing

HYPER B-series Short-Block Package

Significantly increases compression level. Strengthens structual integrity for reliability. Greatly improves engine response and efficiency. Not recommended for street use. Details on what we do to the short-block for this package below:

• Block is Precision Honed To Exact Tolerances
• New Piston Rings
• New Main Bearings
• New Thrust Washers
• New Rod Bearings
• High-Compression Pistons (Race Spec)
• Mild Bottom-End Strengthening
• Micro-Polish Crankshaft
• New Gaskets and Seals
• Mild Flywheel Lightening
• Complete Precision Balancing

  

  

Note: We do not recommend this buildup if your cylinder head has been milled. Make sure you have an adequate fuel delivery to compensate for the increase in compression.
Contact us for an inquiry and pricing.

Re-Worked Cylinder Heads

Inline Four can also provide you with state of the art cylinder head porting. From a mild clean-up port to a full race port. All cylinder heads are flowbench tested for optimum performance gains. Competition valve job performed on all cynlinder heads. Choice of stainless steel valves, stiffer valve springs and titanium valve retainers available for increased efficeincy. Replaced valve guides and valve seals to prolong longevity. We do not recommend milling of the cylinder head due to improper timing characteristics. All cylinder heads are inspected upon receival for any discrepancies.

Choose a short-block package and add a cylinder head port for a fully built motor.
Contact us for an inquiry and pricing.

B16A VTEC Cylinder Heads

Inline Four offers B16A VTEC heads which are ideal for an LS/B20 VTEC conversion. If you are planning to use the B16A head for an LS/B20 VTEC conversion, we can offer you cylinder heads that have been modified to complete the LS/B20 VTEC installation. Our LS/B20 VTEC B16A heads come with a oil line and fittings. All B16A cylinder heads, standard or modified for LS/B20 VTEC, come complete with valve cover, stock intake manifold, stock camshafts, stock cam gears and stock fuel rail. Distributor not included. Cylinder heads and included accessories are used parts with under 30k miles of use.
Contact us for an inquiry and pricing.

All engine build-ups use OEM Honda bearings, piston rings, gaskets, and seals. We use OEM products because of their near zero tolerance characteristics, superior construction and reliability.

Used DOHC VTEC Engines

Inline Four now offers used DOHC VTEC engines. These engines are perfect for a transplant into your SOHC Honda. Feel the difference in torque and horsepower! Knock off the seconds from your 1/4 mile or lap times with one of these. Power to weight ratio at its best. Click Here! for details.

Instructions On Ordering:

Please call us at 714-903-1898 or email us to discuss in detail, the services you'd like us to perform on the merchandise being shipped to us and for exact pricing. A 50% deposit is required. You can choose to pay by certfied cashiers check, money order, money gram or money wire transfer(western union). If you have any questions regarding our engine building services, please don't hesitate to email us or call us. We'll be happy to assist you.